Our Services

Commercial Roof Repair Services in Columbus

Which Repair Service Fits the Roof Over Your Building?

We offer commercial roof repair services in Columbus for flat, metal, and plant roofs, plus leak tracing when the source is unclear.

Roof crew patching a split seam in a single-ply membrane on a flat commercial roof

Four Services

Commercial Roof Repair Services in Columbus by Roof Type

Every one of our commercial roof repair services in Columbus starts with the roof type and the leak. Pick the card that matches what you see.

Roofer clearing a flat roof drain and resealing the membrane around the drain bowl

Flat Roof Repair

TPO, EPDM, PVC, built-up, and modified bitumen roofs on shops, offices, and garages. Most leaks start at laps, drains, and the base of walls.

  • Seam and puncture patches
  • Drain bowl rebuilds
  • Wall and curb reflashing
Columbus flat roof repair
Roofer replacing a rusted panel on a commercial metal roof

Commercial Metal Roof Repair

Exposed-fastener and standing-seam steel roofs on warehouses, ag buildings, and shops. Washers, end laps, and trim wear out long before the steel does.

  • New fasteners and washers
  • Resealed end laps
  • Matching replacement panels
Columbus commercial metal roof repair
Roofer on a scissor lift tracing a roof leak at a stained ceiling inside a metal building

Commercial Roof Leak Repair

Any roof type when water shows inside and nobody knows where it gets in. We trace from the stain uphill to the opening, then confirm it.

  • Drip mapping inside
  • Upslope search and water test
  • Moisture check after repair
Columbus commercial roof leak repair
Roofer resealing curb flashing on an industrial plant roof

Industrial Roof Repair

Plant roofs with exhaust fans, stacks, pipe stands, and heavy foot traffic. Equipment zones get the most wear and the most careful repairs.

  • Fan and stack curbs
  • Residue damage repair
  • Walkway pads to equipment
Columbus industrial roof repair

Spot Or Section

Which Commercial Roof Repair Service Fits My Building?

Most repairs are spot repairs. Some roofs need a whole section rebuilt. Here is how the two compare on a Columbus building.

Roofer checking a core cut with a moisture meter on a flat commercial roof

Spot Repair

Damage Area
A seam, curb, drain, or screw row
Insulation
Dry outside the repair
Typical Service
Any of the four services
Disruption
Short visit, building stays open
Best Next Step
Inspection and a ranked repair list
Roofer walking a commercial roof with a building manager and pointing out repair areas

Section Rebuild

Damage Area
A whole bay or slope
Insulation
Wet across the section
Typical Service
Flat or industrial repair
Disruption
Longer job, planned by zone
Best Next Step
Core cuts to size the section

Quick Match

Which Repair Service Matches What You See

Find the symptom in the first column. The service beside it is where most of those repairs start.

What You SeeLikely SourceService
Water near a drain days after rainClogged strainer or low spot in the membraneFlat Roof Repair
Rust rings around screw headsHardened washers on exposed fastenersCommercial Metal Roof Repair
Ceiling stain with no clear causeOpening upslope of the stain, under the surfaceCommercial Roof Leak Repair
Soft roofing downwind of a fanHeat and residue from exhaustIndustrial Roof Repair
Stains high on an exterior wallLoose coping or wall flashing at the parapetCommercial Roof Leak Repair
Blisters on an older flat roofMoisture trapped between pliesFlat Roof Repair
Plain work truck beside a brick commercial building while a roofer climbs a ladder to the roof

Not Sure Which Repair Your Roof Needs?

Call and describe the roof and the leak. We will tell you which service fits, then come out and confirm it on the roof.

Call Us

Every Service

The Five Steps Behind Every Repair Service

All four services run through the same steps, so you know what to expect whichever one fits your roof.

Job Ticket

  • Roof type and age
  • Where water shows inside
  • Core cut results
  • Photo of each problem
  • Repair list by priority
  1. 1

    Listen

    Hear What the Roof Is Doing

    You tell us where water shows, when it leaks, and what the roof is made of. That narrows the search before we arrive.

  2. 2

    Inspect

    Walk the Roof and Ceiling

    Stains get marked inside, then seams, flashing, drains, curbs, and fasteners get checked on the roof above.

  3. 3

    Confirm

    Prove the Source

    Core cuts, moisture readings, or a water test confirm the opening and show whether the insulation stayed dry.

  4. 4

    Repair

    Fix With Matching Material

    Each repair uses the same membrane, panel profile, or flashing as the roof around it.

  5. 5

    Record

    Photos and Notes

    You get photos of every repair and its location, so the next visit starts from a record.

Service Questions

Questions About Our Columbus Repair Services

How owners pick a service and what each one covers.

Which service do I need if I do not know what kind of roof I have?

Start with leak repair

Start with commercial roof leak repair. We identify the roof type during the inspection and trace the water to its source. Once the opening is found, the repair falls under flat, metal, or industrial work, and you get one list covering all of it.

Do you repair roofs with more than one system on the same building?

Yes, all of them

Yes. Plenty of buildings have a steel shop roof beside a flat office roof, or a plant roof with a membrane section. We repair each system with its own material and flash the joints where the two roofs meet.

Is commercial roof replacement one of your services?

Repair only

Our services are repairs. When a roof is past repair, we tell you plainly, show you the photos and core results, and keep the roof watertight with repairs while you plan a replacement.

How quickly can a repair visit be scheduled?

Call to set a time

Scheduling depends on the weather and the job list, so call and tell us what the roof is doing. Active leaks over equipment or stock get priority, and we can talk you through protecting the area until we arrive.

Do repairs come with photos?

Yes, every repair

Every problem we find and every repair we make gets photographed and tied to a location on the roof. You keep the photos for your records, your insurer, or the next contractor who works on the building.

What should I have ready before the inspection?

Access and history

Roof access, a ladder or hatch location, and any past repair records help most. Tell us where stains or drips show inside and when they appear. Photos of the ceiling or the roof from a phone are useful too.

Do you repair skylights and roof hatches?

Yes, as roof details

Skylights and roof hatches are part of the roof, so their curbs, flashing, and laps get repaired like any other detail. Cracked skylight panels on metal roofs are replaced with panels that match the profile, and hatch curbs get reflashed where water runs under them.

What happens if the repair needed turns out bigger than expected?

We stop and tell you

When a roof opens up and shows more wet board or rusted steel than the inspection did, we stop, photograph it, and tell you before going further. You decide whether to widen the repair now or seal the area and plan the rest for later.

Can one visit cover more than one repair service?

Yes, one visit

One inspection covers the whole roof, whatever services the repairs fall under. A building with a flat office roof, a steel shop roof, and a leak over the warehouse gets one walk, one set of photos, and one repair list ranked by urgency.

Book Commercial Roof Repair Services in Columbus

Tell us what roof you have and what it is doing. We will match it to the right service and send photos of what we find.

Call (531) 307-8529